5
6
4. E-PARTS OVERVIEW
4.1 Explanation
NCM MTB E-bikes are equipped with components that work together to give you a smooth, powerful and effortless riding
feel. Our pedal-assist system consists of the following:
Battery
NCM E-bikes’ integrated lithium-ion battery packs are some of the highest capacity packs available on the market, with the
Prague storing up to 468Wh of energy. The packs consist of high-density cells, meaning that our designs remain sleek and
light without any sacrifices to battery capacity. Furthermore, most of our designs boast a built-in USB port, perfect for
charging your cell phone or other small electronic devices on the go.
Motor Powered by Das-Kit
Our proprietary Das-Kit X15 motor stands at the top of the market, offering smooth, powerful performance while remaining
surprisingly quiet. Rated at 250W, it achieves a maximum of 55Nm (newton metres) of torque, ensuring that no hill is too
steep and no terrain too rugged for the NCM Prague. Its versatility allows for triple chainring cranksets, giving the rider
more options and reducing the energy usage of both the rider and battery.
Display
The Das-Kit control panel gives the rider full command over the electric system, and its simple setup provides all the
information you may need about your E-bike at the quick touch of a button, allowing you to spend more time enjoying the
world around you. The display provides the following information:
● Battery level indicator
● Support level indicator
● General indicators: speed, distance etc.
When using the brake with the brake sensor (the brake lever controlling the front brake), the sensors inside cause the
engine’s support to stop immediately. Engaging the rear brake will automatically stop the motor’s assistance in all cases.
Another sensor, within the crankset, also serves to stop the motor when the rider stops pedaling.
The bike can also be used without electrical support from the motor; by setting the support level to 0, the E-bike will
behave like a traditional bicycle. An empty battery will not render your bike unusable.
4.2 Battery & Charger
4.2.1 Overview
1 Battery Lock
2 Battery
3 Capacity Level Button
4 Capacity Level Light
5 Charging Port
6 USB Port (output: 5V 1A)
WARNING: (Sticker on the battery)
Please ensure that the battery is locked before use.
NCM
PRAGUE 36V
E-PARTS OVERVIEW
To Next Page
Loading...
