23
DISPLAY
※ The display cannot return to normal status until the problem is solved, the E-bike’s electric components will not
operate if there is an error in the system. However, the bike can still be operated conventionally (without electric
assistance).
※ Hold ON/OFF and SET at the same time to show the error code.
Section 5:
5.1 DISTANCE INDICATOR
With the display on, press SET to select between ODO, time, trip 1 and trip 2.
5.1.1 ODO
The ODO (odometer) records the riding mileage from the very start of the display’s usage;
5.1.2 Time
The riding Time indicator is automatically reset when the display is shut off.
5.1.3 Trip 1
Shows the riding distance of this time. On the Trip 1 display, press the SET button for 2 seconds and the display icon
will flash at 1 Hz, and keep holding SET for 2 more seconds to clear Trip 1.
5.1.4 Trip 2
Trip 2 shows the previous riding distance for 30s after the display is turned on; it can be reset automatically to start to
record the current session’s mileage.
Section 6:
6.1 BATTERY INDICATOR
To Next Page
Loading...
