L230/L130 User Manual
7
Installation
Install the vSpace software
Insert the Software Installation CD into the host PC's CD drive.
In most cases, a window will automatically appear after a few seconds with installation
options. If it doesn't appear after 2 minutes, go to "My Computer", open the CD drive's
icon, and start the "Setup" application.
At the installation screen, click on the "Install Program" button.
Before the installation starts, the installation software attempts to connect via the Internet
to compare the software version on the CD with the latest software version on the
NComputing server. This check for the latest software version should work if either of
TCP ports 80 or 3630 is open. If a later version is available on the NComputing server,
the following prompt will appear to ask if you want to use the version on the CD or if you
want to install the latest version. NComputing recommends you install the latest version.
Note: The following message will appear if the computer is not connected to the Internet
or a program such as a firewall blocks the TCP ports used for the update check..
.
To Next Page
Loading...
Need help?
General
