NComputing X350 User Guide

X350/X550 User Manual
Page 28
Using the vSpace Console
Start the management console from the Windows Start menu. The application is called,
"vSpace Console."
You can also start the management console by right-clicking on the NComputing icon in
the system tray and selecting "vSpace Management Console" or by simply double-
clicking on the NComputing icon in the system tray.
The current color of the NComputing system tray icon displayed on the administrator’s
host station provides terminal services status information
Terminal services is
enabled and running
normally.
Terminal services is enabled and
running, but a minor system
module inconsistency has been
noted. Please check NComputing
online Knowledge Base for any
recommended software update.
Terminal services has
been disabled on this
system.
Other vSpace options available from a right-click on the system tray icon are:
 Station Information – tells you about the station where logged-in

NComputing X350 Specifications

General

Brand	NComputing
Model	X350
Category	PCI Card
Language	English