X350/X550 User Manual
Page 31
X350/X550 PCI Card
Selecting the "X350 PCI Card" or “X550 PCI Card” item shows information about all the
vSpace sessions currently possible on that PCI card.
By right-clicking on the selected “X550 PCI Card” (or “X350 PCI Card”) item you can:
Stop Stations: this will stop the sessions on all of the user stations that are
connected to this card at once.
Start Stations: this will start the sessions for all stations connected to this card if
they are in the stopped state.
View: this lets you select different viewing options for the information in the right
pane.
Refresh: refreshes the information displayed in the right pane
Export List: Exports a list (tab or comma delimited text file) that can be used to
keep a record of which users (if any) are logged-in to each station at a point in
time.
Properties: Display or modify the properties defined for that particular PCI Card.
NOTE: All stations attached to the same X350/X550 PCI card will use the same
resolution and color depth that is set in the Administration Console. Right
clicking on the Properties option brings up a new window that allows setting the
common monitor resolution and color depth. (A system reboot is required before
the new resolution and/or color depth can take effect.)
Note: you CANNOT change the monitor resolution and color depth from the
Display Properties on each individual station (e.g. right clicking on the Windows
desktop).
To Next Page
Loading...
