X350/X550 User Manual
Page 35
The "Information" tab (seen below) shows the following information about the selected
station’s session:
• Station name: the access device / station’s “provisioned name”
• Session ID: the vSpace session number for the session on this station.
• Logged in user: the username that is currently logged in.
• Default user: the default username for the terminal session. If one is not
configured, it shows the last user that logged in.
• Status: the session status.
• Logon program: the filename that will run at session login (typically a kiosk type
application)
• Logon program folder: the folder where the logon program exists.
• AutoLaunch enabled: the station’s automatic launch status.
• Display Id: the PCI card ID for the card to which this station is attached
• Hardware Id: the virtual hardware “name” for the station’s access device
• Keyboard Id: what type of keyboard interface is used (always PS/2)
• Pointer Id: what type of pointer interface (i.e., mouse) is used (always PS/2)
To Next Page
Loading...
