X350/X550 User Manual
Page 37
means that the monitor will always remain powered on. (All normal screen saver
functions still apply to prevent monitor “burn.”)
• Enable “Auto Logon” mode: When this is enabled and there is an entry in the
“username” and “password” fields, the specified username is automatically
logged in when the station starts. Note: a password must be entered to enable
this feature. Also, note that in some environments your Windows Group Policies
may require users to first hit “CTRL-ALT-DEL” to complete a logon.
• Run this program only during Logon: and In folder:
When you select a program to run and the folder where it is located, the program
is started when there is a logon using the station. (This option along with the
Enable Auto Logon are often used in setting up unattended kiosk environments.)
• Initial keyboard state: These check boxes allow setting the specific keyboard
states that will be active when the station starts. There are separate settings for
Num-Lock, Caps-Lock and Scroll-Lock.
• Keyboard Type (only visible on operating systems using double-byte characters
such as the Korean language OS): Use this drop down to select the appropriate
keyboard type from the available options (see below).
To Next Page
Loading...
