14 Non-Scale 2-Bag Bagwell Upgrade
3. Disconnect the following cables:
• Local Area Network (LAN) Cable from the Customer Interface
• ACPower Out Cables from the Power Strip
• AC Power In Cable from the Power Strip
Note: Remove cables from any routing clips or tie wraps if needed.
4. Route the following cables through the cable access hole:
Bagwell Cable Access Hole
• AC Power In Cable
Core Cable Access Hole
• Local Area Network (LAN) Cable
• AC Power Out Cables
Note: The Local Area Network (LAN) Cable and ACPower In Cable may be routed
differently depending on the installation conditions.
To Next Page
Loading...
