28 Non-Scale 2-Bag Bagwell Upgrade
Installing Bagwell Skirt Panels
To install Bagwell skirt panels, follow these steps:
1. On the side of the Bagwell, do the following:
a. Attach the skirt panel to the skirt brackets by aligning the open slots in the skirt
panel with the screw holes in the skirt bracket.
b. Secure the skirt panel to the bracket using three (3) screws.
c. Adjust the skirt panel so that it is flush with the floor.
d. Tighten the screws to secure the skirt in place.
To Next Page
Loading...
