NCR SelfServ 90 R1.2 User Manual

Second Display Mount 5
Installing the Second Display Assembly
To install the Second Display Assembly on the NCR7709, follow these steps:
1. Install the Second Display Mount on the Second Display unit. For more information,
refer to Installing the Second Display Mount on page3.
2. Insert the key into the NCR7709 keylock, turn the key clockwise, and then carefully
open the NCR7709.
3. Remove four nuts securing the Second Display Blanking.

NCR SelfServ 90 R1.2 Specifications

General

Brand	NCR
Model	SelfServ 90 R1.2
Category	Racks & Stands
Language	English