NCR XL7 Instructions

Pole Mount 9
10. Install the Display on the Bracket (4 thumbscrews).
Without Quick-Release Bracket
Warning: Disconnect the AC power cord from the AC outlet and wait 30 seconds
before servicing the terminal.
1. Lay the Display face down on a flat surface.
Note: Always use a soft material (cloth, foam) to protect the display screen when
placing the terminal face down.
2. Remove the Cable Cover.
a. Remove the two (2) screws that secure the Cable Cover to the Back Cover.

NCR XL7 Specifications

General

Brand	NCR
Model	XL7
Category	Racks & Stands
Language	English