NDS SC320M User Manual

13.F.A.Q.
• About solar panels, what’s the maximum voltage
supported by SUNCONTROL2?
Maximum supported voltage is 29,5V.
• Is it possible to connect one 200W solar panel
only, on a single SUNCONTROL2 connection?
It’s possible to connect just one bigger solar panel
(200W), for example on SUNCONTROL2 Pin N°5, but
you must connect Pin N°5 and Pin N°6.
For the connection bridge, please use, at least, a 6
mm
2
cross-size cable.
• Is it normal to have a battery voltage (with solar
regulator working) over 15V?
It’s normal when the device is in desulphation mode.
It is possible to turn OFF the desulphation selecting
the proper charging curve: look at the chapter
“Charging curve selection”.
20

NDS SC320M Specifications

General

Brand	NDS
Model	SC320M
Category	Controller
Language	English