obligation to apply these changes to the devices
previously distributed.
• The images of the products are purely indicative and
may therefore not be fully representative of the
characteristics of the product, differing in colour, size
or accessories
2. PACKAGE CONTENTS
Check the contents of the package:
• 1 x SUNCONTROL2
• 1 x Replacement fuse
• Wall mounting screws
3. DESCRIPTION
SUNCONTROL2, the automatic solar regulator with
MPPT technology to push the efficiency of photovoltaic
modules to the maximum: more energy, less space.
The MPPT algorithm always uses the "maximum power
peak" delivered by the panel, with a significantly higher
performance than the PWM technology (up to 25% more)
SUNCONTROL2 available in two models SCE 320 and
SCE 360, manages (depending on the model), up to
350W input, with a maximum charge of 25A. The new
microprocessor, equipped with OPTICHARGE firmware,
performs up to 6 charging phases, including desulphation
and maintenance phases, for optimal recharging of the
on-board batteries.
SUNCONTROL2 is compatible with the following
battery technologies: GEL, AGM, Wet and LiFePO
4
and
both the leisure batteries and the starter battery can be
recharged.