13
2. Projector
On the home page, select > [Projector] and press .
[Image Correction]
Auto Keystone Correction Settings
[Auto Keystone Correction By Remote]: Enable or
disable auto keystone correction by remote.
[Auto Keystone Correction At Startup]:
Automatically perform keystone correction when
the projector powers on.
[Auto Keystone Correction After Movement]:
Automatically perform keystone correction when
you move the projector.
[Manual Keystone Correction]: Enable manual
keystone correction. It is only available when auto
keystone correction is off.
[Auto Screen Fit]: Enable or disable auto screen fit.
[Auto Obstacle Avoidance]: Enable or disable auto
obstacle avoidance.
[Perform Manual Keystone Correction Access]:
Manually perform keystone correction by adjusting
each corner.
[One-click Image Correction]: Automatically adjust
the image size to your surface.
[Zoom]: Zoom in or out of the projection image
from 50% to 100%.
[Focus Settings]
[Auto Focus at Startup]: Automatically adjust the
focus when the projector powers on.
[Auto Focus After Movement]: Automatically adjust
the focus when you move the projector.
[Manual Focus Correction]: Enable manual focus
correction.
To Next Page
Loading...
