09
3. Charge Your Projector
For first-time use, fully charge your projector using the provided adapter
and charging cable.
4. Power On / Off
Press and hold the projector power button for 1.5 seconds to power on / off.
S
•
When the projector is connected to an adapter, you can
use the remote control to power it on.
•
In HDMI Source Mode, the projector will switch to standby
mode after 10 minutes of button inactivity or when no
signal is detected.
•
When standby mode lasts for 30 minutes, the projector
will automatically power off.
To Next Page
Loading...
