English
10
Getting Started
1.
Placement
Place this device on a stable, flat surface, and squarely
point it to face the projection surface. For best results, the
projection surface should be white and flat. The distance
between this device and the projection surface must be a
minimum of 23 inches (0.58 meters) and a maximum of
121 inches (3.08 meters) to get a projection image from 20
to 100 inches.
23”
0.58m
3.08m
121”
T
•
It is unnecessary to tilt it towards the projection
surface. You can correct the projection image with
the built-in keystone correction.
•
The distance between the device and the projection
surface determines the projection image size. For
the best result, set the projector between 40 and
80 inches away.
To Next Page
Loading...
