The device needs to be cleaned after every skincare process.
Ensure the device has been completely turned o and all
indicator lights are o.
Clean the surface of the device with a clean, dry cotton pad.
Use a hygroscopic paper (such as a paper towel) to gently
wipe o any gel residue left on the RF head. You can use
cleaning solutions up to 70% alcohol, but do not use acetone
or other corrosive cleaning solutions because they would
damage the device. Do NOT soak the device in the cleaning
solution.
Keep all components away from water.
When you’ve cleaned the device, put the device back in the box.
Cleaning
7
To Next Page
Loading...
Need help?
General