7
Placing Calls
Listen for Dial Tone before dialing a Telephone Number.
You can have function keys for Trunks or Trunk Groups. Ask your Supplier.
Place an Outside Call <Quick Access>
Trunk Ke
Tele
hone Numbe
Listen for Dial Tone before dialing a Telephone Number.
In case the number of Trunk Group is more than 10, you should enter 3 digits (e.g. 011 : Group 11) afte
dialing “804”. Ask your Supplier more details.
Place an Outside Call <Access by Code>
CALL 1
Trunk No.
e.
. Trunk 5
Trunk Grou
No.
9
8 0 4
8 0 5 0 50
Tele
hone Numbe
Pressing CALL key after dialing an extension number is also possible.
Your call will ring or voice-announce. If you hear ringing, wait for an answer. If you hear a beep, begin
speaking. Dialing “1” changes voice/ring mode. (in case the destination is Key Telephone)
Place an Intercom Call <Dial Access>
Extension Numbe
CALL 1
? ? ?
?
? ? ? ?
? ? ? ?