B REAK M ODE
SET CANCEL
➤ Press Speaker. ➤ Press Speaker.
➤ Dial 40
. ➤ Dial 42.
➤ Press Speaker. ➤ Press Speaker.
NOTE 1: Break Mode is only available while an agent is logged-on.
NOTE 2: A Break key may be assigned in system programming to set/cancel Break Mode. A lit LED
indicates that the station is in Break Mode.
A NSWERING A C ALL U SING A H EADSET
➤ Press Headset to answer.
➤ Converse.
➤ Press Headset to hang up.
V
olume Control
OFF-HOOK RINGING VOLUME
➤ Lift handset.
➤ Dial 60
.
➤ Dial Off-Hook Ringing Volume
code 1
.
➤ Press ▼ or ▲ to set level.
➤ Replace handset.
NOTE 1: Press ▼ or ▲ during audible telephone activity to
adjust handset or speaker volume.
NOTE 2: When the telephone is idle, ▼ or ▲ is used to adjust display contrast.
P
rogramming
R
ESETTING F EATURE LED
➤ Press Feature.
➤ Dial 99
.
➤ Press Feature.
NOTE: Resetting the Feature LED will cancel Call Forward All Calls, Do Not Disturb and Callback
Request settings.
15
RINGING VOLUME
➤ Press Speaker.
➤ Dial 60
.
➤ Dial Ringing Volume code 1
.
➤ Press ▼ or ▲ to set level.
➤ Press Speaker.
NECK-007 Multiline Guide 4/4/01 3:55 PM Page 15
To Next Page
