NEC DTU-32D-2 - Page 18

S TATION S PEED D IAL – DIAL A CCESS
➤ Press Feature.
➤ Press Redial.
➤ Dial Speed Dial Memory location 80~99
.
➤ Dial trunk access code i.e.
_
9 (if necessary).
➤ Dial telephone number to be stored
(24 digits maximum).
➤ Press Hold (if entering name) and dial name of party (13 letters maximum).
➤ Press Feature.
NOTE 1: Press Redial to insert a pause or Recall to store a hookflash.
NOTE 2: Refer to Character Entry Codes or use the dial pad on the telephone when entering
the name of party.
F EATURE A CCESS K EYS
STATION SPEED DIAL
(OUTSIDE NUMBERS)
➤ Press Feature.
➤ Press Redial.
➤ Press Feature Access key to be
programmed.
➤ Dial 0
.
➤ Dial trunk access code i.e.
_
9
(if necessary).
➤ Dial telephone number to be stored
(16 digits maximum).
➤ Press Feature.
NOTE 1: Press Redial to insert a pause and Recall to insert a hookflash.
NOTE 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.
O NE T OUCH K EYS
STATION SPEED DIAL
(OUTSIDE NUMBERS)
➤ Press Feature.
➤ Press Redial.
➤ Press One Touch key to be programmed.
➤ Dial 0
.
➤ Dial trunk access code i.e.
_
9 (if necessary).
➤ Dial telephone number to be stored
(16 digits maximum).
➤ Press Feature.
NOTE 1: Press Redial to insert a pause and Recall to insert a hookflash.
NOTE 2: Busy Lamp Field status indication will be provided on keys programmed for DSS.
16
DSS/BLF (STATIONS) AND
FEATURE ACCESS
➤ Press Feature.
➤ Press Redial.
➤ Press Feature Access key to be
programmed.
➤ Dial 1
and station number to be
stored.
OR Dial feature access code to be stored
as indicated in the Quick Entry
Guide.
➤ Press Feature.
DSS/BLF (STATIONS) AND
FEATURE ACCESS
➤ Press Feature.
➤ Press Redial.
➤ Press One Touch key to be
programmed.
➤ Dial 1
and station number
to be stored.
OR Dial feature access code to be
stored as indicated in the
Quick Entry Guide.
➤ Press Feature.
NECK-007 Multiline Guide 4/4/01 3:55 PM Page 16