38
Using Soft Key
Press FDN Soft Key. Receive special dial tone.
Dial destination; wait for service set tone.
“FORWARD SET” is displayed; Call Forwarding –
Don’t Answer is set.
To Verify (Only For Terminal With LCD)
If verifying for another station, press MULTILINE
APPEARANCE while idle.
Press FWD-NA.
Display indicates the station number calls are for-
warded to.
To Cancel
Press key. Receive dial tone. If canceling
for another station, press MULTILINE APPEAR-
ANCE.
Press FWD-NA or dial "Call Forwarding - Don't
Answer" cancel code. Receive service set tone.
LED goes out at your station (or the DT Series of
the multiline station).
Press key. Call Forwarding – Don’t Answer
is cancelled.
Note:
Call Forwarding for Busy Line and Don't Answer
may be combined depending upon system pro-
gramming.
To Next Page
Loading...
Need help?
General