NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone User Manual

40
If Local Phonebook is enabled by the setting
on the system side, go to STEP2.
If Local Phonebook is disabled by the setting
on the system side, go to STEP 3.
- OR -
Press key to display the Menu screen.
On the Menu screen, select Directory.
If Local Phonebook is enabled by the setting
on the system side, go to STEP 2.
If Local Phone is disabled, the display
changes as follows. In that case, select
System and go to STEP 3.
STEP 2: Press Sys soft key.
STEP 3: Enter a name and then press
or OK soft
key to perform a search.
Ex. To enter “NEC”:
Press key twice to enter “N”.
Press key four times to enter “E“.
Press key twice to enter “C“.
Note:
Select an item on the menu screen in either of
the following two ways.
• Press an appropriate digit key.
• Highlight a desired item and then press
or OK soft key.
Note:
This feature cannot be activated from the Menu
key on DT710 Series (ITL-6DE-1).
Menu
2
History
Back OK
1
2
Tool
3
Directory
2
Personal
Back OK
1
2
Corporate
3
System
Note:
If “>>>” soft Key is pressed on the above screen,
the following soft keys appear. Pressing or
Eu-s/Eu-l soft key shifts characters between
uppercase and lowercase.
Note:
To delete an entered character, press or Clr
soft key.
Phonebook
Local Sys Cnl
6
3
2
Name:
>>>OKClr

NEC
<<< -Eu-s
Cnl
(Lower-case character)
<<< -Eu-l
Cnl
(Upper-case character)

NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Specifications

General

Brand	NEC
Model	ITL-12D-1 - DT730 - 12 Button Display IP Phone
Category	Telephone
Language	English