116
STEP 3: When DT830 Series is placed in Security
mode, Security Lamp lights red and the
screen saver will be activated.
• To Unlock the Telephone
STEP 1: Display the Password Entry screen by either
of the following operations.
• Press any key while the screen saver is
activated.
• Press the Security key while the screen saver
is activated.
STEP 2: Enter the password and then press
or the
OK soft key. Security Lamp is extinguished
and Security Mode is canceled.
Security lock will be released.
OK
Cancel
Please input a password.
BK
Note:
When the password entry ends in failure, the fol-
lowing error message is issued. In that case,
press or the OK soft key and then retry.
Note:
After a third attempt (if incorrect password
entered three times), the following error message
is issued. Press or the OK soft key. The tele-
phone locks up, and any key operation will be
disabled for 10 minutes. After 10 minutes, make
a retry.
Note:
If you forget the password, please contact the
system administrator.
Password Error.
OK
Cancel
Retry?
Incorrect security code
OK
password entered.
To Next Page
Loading...
Need help?
General