NEC ITZ-12D-3 User Manual

182
STEP 11:Select either Disable or Enable.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press or OK soft key.
• Press or key, and then press or OK soft
key.
A maximum of four telephone numbers can be set
to an entry. If Enable is selected here, the tele-
phone number which is being edited will be given
top priority. In that case, the telephone number is
automatically selected when you make a call with-
out specifying a specific telephone number.
STEP 12:The display goes back to the Edit screen
again. Select Company Name.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 13:Enter a company name.
Enter a company name by using digits keys. After enter-
ing the company name, press or OK soft key.
Note:
A maximum of four telephone numbers can be
set to an entry. If two or more telephone numbers
are required to be set, set the remaining tele-
phone numbers to Tel #2 - Tel #4.
Note:
If multiple telephone numbers are registered to
an entry and Priority Flag is disabled to all of the
telephone numbers, the telephone number set to
Tel #1 is automatically set as first priority number.
1
2
1
2
2
[Priority Flag]
OKPrev
1
1
2
Enable
Disable

7
7
Note:
Up to 32 characters can be entered as a com-
pany name. For details on character entry
method, see HOW TO INPUT CHARACTERS.
1
2
[Edit]
3
4
5
OK
Back
6
7
8
9
0
Save
Gr
No
Ring Tone
Ken Kobus
Tel #4
Tel #2
Tel #3
Illumination
0
Colleagues
Company Name
31300
Input a Company name.
[Company Name]
OKBack
OptionBK
A

NEC ITZ-12D-3 Specifications

General

Brand	NEC
Model	ITZ-12D-3
Category	Telephone
Language	English