NEC ITZ-24D-3 User Manual

77
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 5: Select a protocol used by the destination
server.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press or the OK soft key.
• Press or key, and then press or the OK
soft key.
STEP 6: The display goes back to the Backup/Re-
store screen.
When FTP is selected here, go to STEP
7.
When TFTP is selected here, go to STEP
15.
STEP 7: Select FTP Settings.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
1
2
[Setting]
3
OKMenu
User Setting
Download

Data Backup/Restore
4
4
1
2
[Backup/Restore]
3
4
OKBack

Data Backup
Data Restore

Server Address
5
FTP Settings
Protocol
1
2
1
2
[Protocol]
OK
Back
TFTP

FTP
1
2
5
5
1
2
[Backup/Restore]
3
4
OKBack
Data Backup
Data Restore

Server Address
5
Protocol
FTP Settings

NEC ITZ-24D-3 Specifications

General

Brand	NEC
Model	ITZ-24D-3
Category	Telephone
Language	English