NEC L51W - Basic Operation of Mirrorop Sender Lite (for Mac)

12
5. Select the projector’s SSID (”NECLEDPJ” by default), then click [Connect].
 Awindowforconrmingthechangeofthecomputer’sscreenresolutionappears.
 Resolutionshowninthewindowforconrmingvariesdependingonyourcomputer.
6. Check the message, then click [OK].
 Thecomputer’sscreenresolutionchangesandthecomputer’sscreenisprojectedfromtheprojec-
tor.
• Todisplaytheimagewithoutchangingthecurrentresolution,click[Cancel].
• Afterthersttime,theBenchmark&CongurationToolisnolongerlaunchedwhenMirrorOp
Lite(forWindows)isstarted.
About operations on the MirrorOp Lite window
Cancels transmission of the computer’s screen.
Resumes transmission of the computer’s screen.
Sets the computer’s screen to a still picture.
When clicked again, the still picture is canceled.
Displays the sub-menu.
7. To quit MirrorOp Lite (for Windows), click on the MirrorOp Lite window.
 Awindowforconrmingthatyouwanttoquitappears.
8. Click [OK].
 MirrorOpLite(forWindows)willquit.
 •TheimageprojectedfromtheprojectorswitchestowirelessLANstandbyscreen.
3-5. Basic operation of MirrorOp Sender Lite (for Mac)
1. Connect the projector and computer by wireless LAN.
 See“2-2.ConnectingtheprojectorandcomputerbywirelessLAN”.
2. Click the “MirrorOp Sender Lite” icon in the Dock.
 MirrorOpLite(forWindows)islaunchedandtheaccesspointselectionwindowappears.