NEC MD322C8-2 User Manual

English-13
English
Controls
OSD (On-Screen Display) control buttons on the front of the monitor
function as follows:
To access OSD menu, press the MENU button.
To change signal input, press the SELECT button.
NOTE: OSD must be closed in order to change signal input.
1 2 3 4 5 6
7
8
9
Landscape
Portrait
1 AMBIENT LIGHT SENSOR Detects the level of ambient lighting allowing the monitor to make adjustments to various
settings resulting in a more comfortable viewing experience. Do not cover this sensor.
2 Power Turns the monitor on and off.
3 LED Indicates that the power is on.
Can be changed between blue and green in the Advanced OSD menu.
4 INPUT/SELECT Enters the OSD Control menu. Enters OSD sub menus.
Changes the input source when not in the OSD Control menu.
NOTE: HDMI or DVI signal are not changed by INPUT button. You need to set HDMI/DVI in
Advanced Menu Tag9.
Hold the button to show USB selection menu when not in the OSD Control menu*
1
.
NOTE: This USB selection setting back to the current setting by OSD menu when you
change input signal or turn off the monitor.
5 MENU/EXIT Access OSD menu. Exits the OSD sub menu. Exits OSD Control menu.
6 LEFT/RIGHT Navigates to the left or right through the OSD Control menu.
You can adjust the volume directly, while the OSD menu is off*
1
.
7 UP/DOWN Navigates up or down through the OSD Control menu.
Show PICTURE MODE menu when not in the OSD Control menu*
1,
*
2
.
8 RESET/PIP Resets the OSD back to factory settings in the OSD control menu.
PIP can be selected when the OSD is not showing*
3
.
Hold the button to show ECO MODE menu while the OSD menu is off*
1
.
9 KEY GUIDE The Key Guide appears on screen when the OSD control menu is accessed.
The Key Guide will rotate when the OSD control menu is rotated*.
* The “LEFT/RIGHT” and “UP/DOWN” buttons functionality is interchangeable depending on the orientation
(Landscape/Portrait) of the OSD.
*
1
When HOTKEY function is OFF, this function is disabled.
*
2
PICTURE MODE menu.
Press the UP/DOWN button to select PICTURE MODE in ACTIVE PICTURE. In PIP or PBP (Picture by
Picture) mode, press LEFT/RIGHT button to change ACTIVE PICTURE. Picture mode can be selected for
ACTIVE PICTURE independently.
*
3
PIP MODE menu.
Press the UP/DOWN button to change MULTI PICTURE setting. Press the LEFT/RIGHT button to SWAP when you
select PIP in MULTI PICTURE.

NEC MD322C8-2 Specifications

General

Brand	NEC
Model	MD322C8-2
Category	Monitor
Language	English