NEC Mobile Phone - Using Bluetooth for voice;modem

88
Bluetooth (M89)
Using Bluetooth for voice/modem
2 To use the Bluetooth headset/hands-free kit or Bluetooth modem, you must perform the Bluetooth pairing with your external device beforehand. For details, refer
to the operation manual of the device.
, While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone.
Connecting Bluetooth headset/hands-free kit
2 When connecting a wired headset and Bluetooth headset at the same time, the wired headset will work partially (only its button will work).
2 For some Bluetooth devices, the voice recall function may be activated when a paired headset/hands-free kit is turned on (see “Voice recall” on page 9).
☛ Pair the Bluetooth device and your phone beforehand (see “Pairing a Bluetooth device and your phone” on page 87 for details)
☛ 8 9 1 ➔ 3 to display the Device list screen ➔ Highlight the headset/hands-free kit in the list ➔ SK1 or
Using Bluetooth headset/hands-free kit
☛
To answer the incoming call, press the button on the headset/hands-free kit
☛ To switch the headset/hands-free kit call to your handset call during a call, 9
2 You cannot deactivate Bluetooth during a call.
☛ To end the call, or end from the headset/hands-free kit
Using your phone as Bluetooth modem
2 For details of dial-up connection settings, consult your Internet service provider.
☛ Pair the Bluetooth device and your phone beforehand (see “Pairing a Bluetooth device and your phone” on page 87 for details)
☛ 8 9 1 ➔ 1 to toggle to Bluetooth On to activate Bluetooth ➔ Perform dial-up connection by your PC
☛ To end the dial-up connection, disconnect from the PC application
2 You can also end the dial-up connection by pressing 8 9 1 6
Bluetooth Object Push
You can send/receive the data from Phonebook/Scheduler/ToDo list/Notepad/My data (Videos/Sounds/Pictures/MP3) between other Bluetooth devices.
2 The maximum data size for the Object push service is 6 MB for MP3 and 1MB or less for other files depending on the file type. Any files too large will be displayed
in gray and not be available.
2 While sending or receiving data via Bluetooth, your phone is automatically placed out of service, so phone call, message and i-mode access are disabled.
Indicates Bluetooth On. Indicates that Bluetooth is active.