NEC Mobile Phone - Putting a Call on Hold; Mute; Call Transfer; Multi-Party Calls

10
Basic Calls & Phone Use
Putting a call on hold
☛ To put the received or dialled call on hold, SK1 or 2. To retrieve the call, SK1 or 2 again.
Mute
You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you can still hear the
sound from the other party.
☛ To mute the sound during a call, 3. To retrieve the sound, 3 again.
2 The mute function is automatically released after the call ends.
2 The mute function is not available while using the headset.
Call transfer
When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those two calls active.
☛ To transfer the call, 4.
2 After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
, Call transfer facility is SIM dependent.
Multi-party calls
If your SIM card is multi-party enabled, you can make a conference call to more than one caller. To create the multi-party calls, at least 3 parties, including the host, are
needed.
Receiving the second call
☛
SK1 or to accept the second call ➔ SK2 or 5 to merge both calls to initiate a multi-party call.
2 When you accept the second call, the first call will be put on hold.
Making the second call
☛
SK1 to put the first call on hold ➔ Key in the phone number ➔ SK1 or to make the second call ➔ After the second participant answers, SK2 or 5 to
merge both calls to initiate a multi-party call.