71
My data (M6)
2 If you wish to preview the highlighted stamp, SK1. To display the previous/next stamp, ▲ or ▼.
☛ To apply a text stamp, 2 ➔ Key in the text ➔ ➔ The text stamp position is displayed in centre
☛ Move the stamp position ➔ to confirm ➔ The stamp preview is displayed again. Repeat applying if necessary, or to select another stamp.
☛ SK1 when finished applying the stamp (the stamp preview will not be applied this time)
Adding a frame to the image
☛ Highlight or display the image file you wish to edit ➔ 1 7 ➔ Highlight a frame ➔ to preview the resulting image ➔ Scroll through the various frames
by ▲ and ▼ ➔ to confirm.
Saving the edited image
☛
After any edition, SK1 or to save the edited image ➔ Select the Save Quality
2 SK1 to check the expected size of the image.
☛ Edit the name (if required) ➔
Printing an image using a printer
You can print an Exif format image file by connecting your phone to a PictBridge compatible printer using a USB cable (option).
2 There may be PictBridge compatible printers that cannot be connected to your phone.
2 Refer to the operation manual of the printer for details on the printing.
2 For some printers, an image file name including characters other than alphanumeric characters (e.g. accentuated characters) may cause an error when printing.
☛ ▼ 3 or 6 3 ➔ Highlight a folder ➔ ➔ Highlight an image file you wish to print ➔ 2 4
2 “Print via USB” may be displayed in gray and unavailable, depending on the image file.
☛ Connect your phone and the printer with the USB cable ➔ Prepare the printer ready for printing, referring to its manual
☛ Check the print detail screen displayed
☛ To print as seen on the detail screen, SK1
☛ To edit the print detail and then print, on the print detail screen to display the Options menu ➔ Edit the detail using the Options menu ➔ SK1
2 The Options menu may change depending on the connected printer.
2 If any interruption or error occurs, or the printing is not completed normally, pull out the USB cable and start again from the first step.
No. Print via USB Options menu
1 Number of prints Sets the number of prints to output.
2 Layout detail Selects the paper size, paper type and layout to print the image file.
3 Print quality Selects the required quality of printing.
To Next Page
Loading...
