EasyManua.ls Logo

NEC MultiSync E243F

NEC MultiSync E243F
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English−16
3. Connect devices to the monitor.
DisplayPort
Power cord
HDMI USB-C USB Downstream (Type-A)
DisplayPortHDMI USB
Type-C
Headphone
USB Downstream (Type-A)
CAUTION: Use the provided specified cables with this product so as not to interfere with radio and television
reception.
For DisplayPort, HDMI, USB and USB-C, please use a shielded signal cable.
Use of other cables and adapters may cause interference with radio and television reception.
Please refer to “CAUTION 3” and “CAUTION 9”.
NOTE: Adjustment of the volume control as well as the equalizer to other settings than the center position may increase
the ear-/headphones output voltage and therefore the sound pressure level.
Incorrect cable connections may result in irregular operation, damage display quality/components of the LCD
module and/or shorten the module’s life.
4. Place the cable holder onto the stand (Figure 4).
Place the cables in the cable holder firmly and evenly.
Figure 4

Related product manuals