English−18
CAUTION: • Use the provided specified cables with this product so as not to interfere with radio and television
reception.
For DisplayPort, HDMI and USB-C, please use a shielded signal cable.
Please use a shielded signal cable with ferrite core.
Use of other cables and adapters may cause interference with radio and television reception.
CAUTION: • Please refer to “CAUTION 3” and “CAUTION 11”.
NOTE: • Adjustment of the volume control as well as the equalizer to other settings than the center position may increase
the ear-/headphones output voltage and therefore the sound pressure level.
• Incorrect cable connections may result in irregular operation, damage display quality/components of the LCD
module and/or shorten the module’s life.
• Make sure the signal cable is fully connected to the monitor and the computer.
3. Place the cable holder onto the stand (Figure 4).
Place the cables in the cable holder firmly and evenly.
Figure 4
4. Please check that you can still rotate, raise and lower the monitor screen after you have installed the cables (Figure 5 and
Figure 6).
Figure 5 Figure 6
Power Cord
DisplayPort Cable
Power Cord
DisplayPort Cable
Security Slot
To Next Page
Loading...
Need help?
General