6
Quick Start –continued
7.This LCD monitor is designed for use with a flexible arm.
Please use the attached screws (4pcs) as shown in the picture when
installing.
To meet fhe safety requirements, the monitor must be mounted to an arm
which guaranties the necessary stability under consideration of the weight
of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS
mark).
Tighten all screws.
Replace screws.
75mm
75mm
Thickness of Bracket (Arm)
2.0~3.2mm
4 Screws (M4)
(MAX depth: 8.5mm)
Weight of LCD assembly: 3.5 kg (MAX)
If using other screws, check depth of hole.
Specifications
To Next Page
Loading...
