8
Flexible Arm Installation
This LCD monitor is designed for use with a fl exible arm.
To mount the monitor to a fl exible arm:
1. Remove the stand (see Remove Monitor Stand for Mounting page 7).
2. Use the 4 screws that are included to
attach the arm to the monitor
(Figure F.1).
Quick Start – continued
CAUTION: Use ONLY the 4 screws that are included when mounting to avoid damaging
the monitor and the stand or arm. For safety requirements, the monitor must be
mounted to an arm which guaranties the necessary stability under consideration
of the weight of the monitor. The LCD monitor should only be used with an
approved arm (e.g. GS mark).
When using mounting accessories (e.g. VESA (200 X 100)) other than VESA
(100 X 100), use the screws M4 size (Length: bracket thickness + 10mm).
(Figure F.1)
100mm
100mm
200mm