NEC MultiSync P435 User Manual

English−87
INPUT MENU
INPUT SIGNAL INFORMATION Shows input signal information.
CURRENT INPUT These functions shows their current settings in the [INPUT SIGNAL INFORMATION] for the selected input
signal.
NOTE: The functions listed here do not have settings for all input terminals available.
RESOLUTION
FREQUENCY
COLOR FORMAT
HDR EOTF
COLOR DEPTH
(SIGNAL/DISPLAY)
HDCP
VIDEO RANGE
VIDEO ID CODE
OVERSCAN
ADVANCED
INPUT SIGNAL SETTINGS Configure settings specific to the video input terminal.
DisplayPort
DisplayPort1, DisplayPort2,
OPTION (DisplayPort)*
2
inputs only
Selects the type of DisplayPort version.
DisplayPort VERSION The following settings can be made according to the input selection.
When receiving an 8K signal, select [1.4] for [DisplayPort1].
DisplayPort1: 1.1a, 1.2, 1.4
DisplayPort2: 1.1a, 1.2
OPTION (DisplayPort): 1.1a, 1.2
Select [SST] or [MST] when [1.2] or [1.4] is set.
NOTE: • [MST] is available when input is DisplayPort1.
• [1.4] is available when input is DisplayPort1.
• If [1.4] is selected, the following restrictions are applied:
- Deactivates [MULTI PICTURE], [MOTION] in [SCREEN SAVER], [STILL], [POINT ZOOM],
[IMAGE FLIP], [QUICK INPUT CHANGE], [DUAL DAISY CHAIN MODE], [AUDIO INPUT],
[ROTATE], [TILE COMP], [TILE CUT] and [DP to HDMI CONVERT].
- [H MONITORS] and [V MONITORS] in [TILE MATRIX] is up to [2].
HDCP VERSION Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: HDCP 1.3
1.2: HDCP 1.3, HDCP 2.2
1.4: HDCP 1.3, HDCP 2.2
NOTE: When [DisplayPort VERSION] is set [1.1a], this function is disabled.
HDR Depending on the selection in the [DisplayPort VERSION], set items as below.
1.1a: DISABLE
1.2: ENABLE, DISABLE
1.4: ENABLE, DISABLE
NOTE: When [DisplayPort VERSION] is set [1.1a], this function is disabled.
EQUALIZER Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
HDMI
HDMI1, HDMI2, OPTION (TMDS)*
2
inputs only
Sets the HDMI mode.
HDMI MODE Selects the type of HDMI mode (version) [MODE1] or [MODE2].
NOTE: When this setting is changed, the OSD will be closed automatically.
HDCP VERSION Select [HDCP 1.4] or [HDCP 2.2].
HDR MODE1: DISABLE
MODE2: ENABLE, DISABLE
NOTE: If [HDMI MODE] is set to [MODE1], this function is disabled.
EQUALIZER Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.

NEC MultiSync P435 Specifications

General

Brand	NEC
Model	MultiSync P435
Category	Monitor
Language	English