EasyManuals Logo

NEC MultiSync V552 User Manual

NEC MultiSync V552
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
English-31
English
3. Press the “DISPLAY” button on the remote control while aiming at the “PRIMARY” monitor. The Information OSD will be shown at
top left side of the screen.
Monitor ID: Displays the ID number of the current monitor within the daisy chain.
Target ID: Displays the ID number of the monitor that to be controlled via daisy chain from the current monitor.
Press the “+” or “-” buttons to change the “Target ID” to show the ID number of the monitor to be controlled. To control the entire daisy chained
monitors simultaneously, select “ALL” as the “Target ID.”
4. Use the wireless remote control to control the “SECONDARY” monitor while aiming at the “PRIMARY” monitor.
The “MENU OSD” will appear on the selected target monitor.
NOTE: If the “ID No.” mode select OSD is showing, press the “DISPLAY” button on the remote control while pointing at the “PRIMARY”
monitor to clear this OSD.
HINT: If you lost control due to the incorrect setting of “IR CONTROL”, pressing the “DISPLAY” button on the remote control for 5 or
more seconds will reset the “IR CONTROL” menu to “NORMAL” function.

Other manuals for NEC MultiSync V552

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync V552 and is the answer not in the manual?

NEC MultiSync V552 Specifications

General IconGeneral
Panel life- h
Pixel pitch0.63 x 0.63 mm
Response time8 ms
Display diagonal55 \
Display brightness430 cd/m²
Display technologyLCD
Native aspect ratio16:9
Vertical scan range50 - 85 Hz
Horizontal scan range31.5 - 91.1 kHz
LED backlighting typeEdge-Lit LED
Supported video modes1080p
Touchscreen technologyInfrared
Display number of colors16.78 million colors
Active display area (W x H)1209.6 x 680.4 mm
OrientationHorizontal/Vertical
Product colorBlack
Product designDigital signage flat panel
Bezel width (top)41.4 mm
Panel mounting interface300 x 300 mm
Wi-Fi-
DVI-D ports quantity2
Cable lock slot typeKensington
Power consumption (standby)2 W
Power consumption (typical)100 W
Package depth250 mm
Package width1430 mm
Package height920 mm
Operating altitude0 - 3000 m
Non-operating altitude3000 - 12192 m
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)5 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
RMS rated power10 W
Cables includedAC, DVI
Weight and Dimensions IconWeight and Dimensions
Depth86.5 mm
Width1294.4 mm
Height765.2 mm
Weight40800 g

Related product manuals