English-14
5. Attach the cable cover
• Use two of the M4 screws (included) to attach the cable
cover.
X463UN
X551UN
6. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of the
computer fi rst.
7. Operate the attached external equipment
Display the signal from the desired input source.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the screen (See pages 21 and 22)
Make adjustments of the screen display position when
necessary.
10. Adjust the image (See page 21)
Make adjustments such as backlight or contrast when
required.
11. Recommended Adjustments
To reduce the risk of the “Image Persistence”, please adjust
the following items based on the application being used:
“SCREEN SAVER”, “SIDE BORDER COLOR” (See page 25)
“DATE & TIME”, “SCHEDULE SETTINGS” (See page 22).
It is recommended that the “FAN CONTROL” setting
(See page 25) be turned to ON also.
To Next Page
Loading...
Need help?
General