To Next Page

To Previous Page

English-42

Name Setting

Click “NAME” on the left side of HOME.

MONITOR NAME Set a monitor name. The name must be 16 characters or less. The default is model name.

HOST NAME Type in the hostname of the network connected to the monitor.

Up to 15 alphanumeric characters can be used.

DOMAIN NAME Type in the domain name of the network connected to the monitor.

Up to 60 alphanumeric characters can be used.

Network Password Setting

Click “NETWORK PASSWORD” on the left side of HOME.

PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password.

However, if you forget your password, consult with your dealer.

HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.

HTTP PASSWORD

ENABLE

HTTP PASSWORD is required when logging in HTTP server.

Set a monitor name as USER NAME when inputting the password.

*What is PJLink?

PJLink is a standardization of protocol used for controlling devices of different manufacturers. This standard protocol is

established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.

The device supports all the commands of PJLink Class 1.

Setting of PJLink will not be affected even when [RESET] is done from the menu.

Questions and Answers:

Need help?

Do you have a question about the NEC MultiSync X464UN and is the answer not in the manual?

NEC MultiSync X464UN Specifications

General