To Next Page
D
dannydaySep 8, 2025
Why is the image of component signal greenish on NEC monitor?
- MMichael AdamsSep 9, 2025
If the image of a component signal is greenish on your NEC monitor, check to see if the Y/Pb/Pr input connector is selected.
Why is the image of component signal greenish on NEC monitor?
If the image of a component signal is greenish on your NEC monitor, check to see if the Y/Pb/Pr input connector is selected.
Why is the SCHEDULE/OFF TIMER function not working on my NEC Monitor?
If the “SCHEDULE”/“OFF TIMER” function is not working properly on your NEC monitor: * The “SCHEDULE” function will be disabled when the “OFF TIMER” is set. * If the “OFF TIMER” function is enabled and the power to the LCD monitor is turned off when the power supply is interrupted unexpectedly, then the “OFF TIMER” will be reset.
How to fix snowy picture and poor sound in TV on NEC MultiSync X554UNV Monitor?
To fix a snowy picture and poor sound in TV mode on your NEC monitor, check the antenna/cable connection. Use a new cable if necessary.
How to resolve interference in TV on NEC MultiSync X554UNV?
To resolve interference in TV mode on your NEC monitor, check components for shielding and move them away from the monitor if necessary.
Why is RS-232C or LAN control not available on NEC Monitor?
If RS-232C or LAN control is not available on your NEC monitor, check the RS-232C or LAN cable connection.
General| Brightness | 500 cd/m² |
|---|---|
| Viewing Angle (H/V) | 178°/178° |
| Color Support | 1.07 billion colors |
| USB Hub | Yes |
| Native Resolution | 3840 x 2160 |
| Response Time | 8 ms |
| Input Connectors | HDMI, DisplayPort, VGA, DVI-D |
| Speakers | Yes |
| VESA Mount | 400 x 400 mm |
| Screen Size | 55 inch |
