To Next Page

To Previous Page

12345

234

12345

12345678901234567890

234567890123456789

NOTE:

• The R,G,B POINT adjustments should only be done if neces-

sary. Over adjusting them may cause the picture distortion.

• The alignment adjustment affects three CRTs at the same time

while the convergence adjustment needs to be performed for

each CRT (R and B) separately.

1) Select "11/R,G,B POINT" from the "ALIGNMENT"menu and

press ENTER to display the "R,G,B POINT" menu. For

dynamic convergence, select "9/POINT" from the "CONVER-

GENCE" menu and press ENTER to display the "POINT"

menu.

2) Use the CURSOR or button to select the item and press

ENTER to display the selected adjustment screen. You can also

select the item directly by pressing the corresponding INPUT

number button.

• The "CROSS-COARSE" test pattern will be automatically

displayed.

• The R,G,B POINT screen in the alignment mode or the

POINT adjustment screen in the convergence mode can be

also displayed by pressing the POINT button on the full

function remote control. The POINT button rotates the

adjustment screen in the following order: COARSE, ME-

DIUM, FINE.

Items to select

• COARSE .............. Coarse adjustment. Number of adjust-

ment zones is 9.

• MEDIUM .............. Number of adjustment zones is 49.

• FINE..................... Fine adjustment. Number of adjustment

points is 208.

3) Use the CURSOR or buttons to move the cursor mark to

the point to be adjusted.

• Pressing the CURSOR button moves the cursor to the right.

Pressing the CURSOR button moves the cursor to the left.

Pressing the CURSOR button moves the cursor to the top.

Pressing the CURSOR button moves the cursor to the

bottom.

m Adjusting R,G,B POINT

-R,G,B POINT-

1/COARSE

2/MEDIUM

3/FINE

RGB POINT

- COARSE -

12345678

123456789

COARSE : 9 zones

MEDIUM : 49 zones

FINE : 208 points

: other adjustable points

: current adjustment point

: zone or point area

The zone or point area is within a range of points

immediately surrounding the current adjustment point.

234

12345

ADJUSTMENT

Brand	NEC
Model	MultiSync XG110LC
Category	Monitor
Language	English

NEC MultiSync XG110LC User Manual

Table of Contents

Other manuals for NEC MultiSync XG110LC

Questions and Answers:

NEC MultiSync XG110LC Specifications

Related product manuals