81
5 Use the CURSOR or button to select either “ACTIVE” or
“INACTIVE” and press the ENTER button.
Items to select
• INACTIVE. Normal operation setting. Power ON is accom-
plished through the rear panel or the POWER
button on the remote control.
• ACTIVE .... Bypasses rear panel power button (or the POWER
button on the remote control) to allow power ON
to be controlled by an AC switched outlet.
6 To complete, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
“OPTION” menu → “ADJUST” menu → Source screen
• If the “RETURN USER MODE?” menu appears, use the
CURSOR or button to select either “YES” or “NO” and
then press ENTER.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
RETURN USER MODE?
YES NO
INACTIVE
ACTIVE
AUTO POWER ON MODE
SETTING
To Next Page
Loading...
Need help?
General