52
1-2. Connect the Battery Backup Unit
Each Server has different procedure to install the BBU. Refer to the server’s manual to
check the steps.
Do not apply the pressure on hold the part shown in figure with too much power.
Parts might be damaged.
Be attentive to the direction of connectors when you connect
BBU(N8103-153/154/155/162) to a RAID controller with a Battery Control Cable.
Align BLACK dot on the connectors of a Battery Control Cable with the
Connector of RAID controller / BBU.
If you reverse connection, parts might be damaged.
＜
＞
＜N8103-149/150/151/172/173/174
＞
＞
To Next Page
Loading...