EasyManuals Logo

NEC NP40 Installation Guide

NEC NP40
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
NEC Corporation of America
Visual Systems Division
NP40/50/60 Installation Guide
Ceiling Mounted and Desktop Rev 1.0
______________________________________________________________________________________________________________________
www.necvisualsystems.com NP40/50/60 Page 1 of 6
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts
Pg 2
Cabinet Dimensions
Pg 3
Cabinet Dimensions cont.
Pg 4
Ceiling Mount Dimensions
Pg 5
Input Panel and Control Codes
Pg 6
Product Description
Type: .55 DDR DMD™ projector Dimensions: 9.7”(W) x 3.9”(H) x 7.1”(D)
Resolution: 1024 x 768 Weight: 3.5 lbs
Brightness: NP40: 2200 ANSI Lumens
NP50: 2600 ANSI Lumens
NP60: 3000 ANSI Lumens
Lens Specifications
Throw Ratio: 1.8 – 2.2 (for 100” diagonal) Focal Length: 20.4 –24.5mm
Offset Angle: 9.8° - 11.7° (for 100” diagonal) F/#: 2.2 2.34
Screen Sizes: 30” - 300” diagonal (4:3) Manual Zoom/Power Focus (w/autofocus)
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on a 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 4:3 Screen Formulas:
W = Image Width W = H x 4/3
H = Image Height (size) H = W x 3/4
B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.481W
C (wide) = 1.830W –0. 600
C (tele) = 2.203W – 0.800
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))

Other manuals for NEC NP40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NP40 and is the answer not in the manual?

NEC NP40 Specifications

General IconGeneral
Display TechnologyDLP
Resolution1024 x 768 pixels (XGA)
Lamp Life2000 hours (standard) / 3000 hours (eco mode)
Weight2.9 kg
Projection TechnologyDLP
Projection Size30 - 300 inches
Input PortsVGA, S-Video, Composite Video, Audio
Output PortsD-Sub 15 pin
Noise Level32 dB (standard mode) / 28 dB (eco mode)

Related product manuals