HANDLING OF COMMON BREAKDOWNS
Manifestations of Breakdown Causes and Treatment
No display on control panel
I. Has power supply switch been pressed in?
2. Is plug properly plug in or is socket in poor
contact?
3. Is the fuse blown or power supply cut off?
Failure of wash function
I. Is the water tap turned on or have you
pressed the 'Start/Pause' button?
2. Is filter at water inlet choked up or has it
iced over?
3. Is water level up to desired level?
Vibration and great noise
I. Is washer steadily positioned?
2. Is base board properly inserted and
secured?
Note: To avert any danger, damaged power supply cables must be replaced by the
manufacturer, its servicing department or authorised personnel specially assigned to the job.
SPECIFICATIONS
Model Number NWTL656
Power Source 230V
Power Consumption 440W
Dimensions (mm) 547 x 936 x 559
Unit Weight 40kg
Maximum Mass of Textile 6.5kg
Standard Water Consumption 160 Litres
Standard Water levels 60 Litres
Operating Water Pressure 780kp
Wash Mode Pulsator / Impeller
Spin Mode Centrifugal Mode
To Next Page
Loading...
