NEC P4WW-24TXH-A - Soft Keys Operation; Soft Key Operations after establishing an Intercom Call; Soft Key Operations during Outside Call

18
Soft Keys Operation
When you press the Speaker Key or lift the handset you will see the following Soft Keys.
Press
“More”
to switch
2-8 TUE 3:03PM
VM:00 Barg Save More
2-8 TUE 3:03PM
Dir Page Pkup More
During Intercom calling (called party does not answer yet) you will see the following Soft Keys.
Press
“More”
to switch
2-8 TUE 3:03PM
Calling 216
VMsg Camp More
2-8 TUE 3:03PM
Calling 216
MW Voice Rls More
◼ Soft Key Operations during Off-Hook condition
Soft Key
Indication
Feature
Next Operation after pressing Soft Key
Dir
Directory Dialing
Refer to Page 6 for Directory Dialing operation.
Page
Paging
Press “InPg” (Internal Paging) or “ExPg” (External Paging), and
dial the Group/Zone number to page.
Pkup
Call Pickup
Press “Pers” for Extension Call Pickup.
Press “ExPg” for External Paging pickup.
Press “InPg” for Internal Paging pickup.
VM:00
Mailbox Access
Refer to Page 16 (VM Soft Key).
Barg
Barge-In
Dial the target extension number to barge in.
Save
Saved Number Dial
Saved number is dialed automatically. Wait for answer.
◼ Soft Key Operations during Intercom Calling
Soft Key
Indication
Feature
Next Operation after pressing Soft Key
MW
Message Waiting
Message Waiting is set. Hang up to finish.
Voice
(Signal)
Intercom Call Mode Switching
(Signal / Voice)
Signal -> Voice : Start to talk after beep tone.
Voice -> Signal : Wait for called party answer.
Press “Voice” (or “Signal”) again to switch Call Mode, if
necessary.
Rls
Hang Up
- - -
VMsg
Leave a Message (In-Mail)
(Option)
Start recording your message.
Camp
Camp On / Callback
Camp On
Wait for the system to call you back without hanging up.
Callback
Hang up and wait for the system to call you back.