When you seize a trunk for outgoing call, or you answered an incoming call, access following features using
Soft Keys.
(When you seize a Trunk)
After establishing
call and pass
4 seconds
LINE 03
Lnd Save Rls Acct
After establishing an Intercom call, access following feature using Soft Keys.
Refer to Page 12
“Conference”
2-8 TUE 3:03PM
Talking to 216
Conf
◼ Soft Key Operations after establishing an Intercom Call
Next Operation after pressing
Soft Key
Dial the desired extension number,
or seize an idle trunk and place a
call to establish a conference.
Press “Add” to invite the other
party, or press “Add” and “Begin”
to start a conference. Press
“AnHd” to retrieve a held call.
◼ Soft Key Operations during Outside Call
Next Operation after
pressing Soft Key
Last dialed number is
dialed automatically.
Wait for answer.
Saved number is dialed
automatically.
Wait for answer.
Account Code Entry
(Option)
Next Operation after pressing Soft Key
Last dialed number is dialed automatically. Wait for answer.
Press “Sys” (System Park) or “StaP” (Extension Park) to select
type of Park Hold.
Dial the desired extension number, or seize an idle trunk and
place a call to transfer.
Dial the desired extension number, or seize an idle trunk and
place a call to establish a conference. Press “Add” to invite the
other party, or press “Add” and “Begin” to start a conference.
Press “AnHd” to retrieve a held call.
Call Duration Time
Indication
Press “Time” again to turn off the Call Duration Time indication.
Repeat Dialing feature is set, and the system automatically
places a call periodically. Wait for answer.
To Next Page
Loading...
