NEC SL1000 - Call Failure Handling; Camp On and Callback Features; Message Waiting Indicator

-7 -
If
y
our call doesn’t
g
o throu
g
h…
 <Camp On> In case of Intercom Call, when you hear ringing, wait for the called party to answer.
In case of Outside Call, when you hear Dial Tone, begin telephone number dialing.
 <Callback> In case of Intercom Call, when your phone starts the ringing, lift handset and wait for the
called party to answer.
In case of Outside Call, when your phone starts the ringing, lift handset, hear Dial Tone, and
begin telephone number dialing.
 This function is applicable in case all trunks are busy condition. (not applicable for dialed outside
party busy)

When you set a MW, the called party’s Indicator starts to flash, and your Indicator is lit in Red.
 When you answer a MW, the Indicator shall automatically be off when the called party answers.
 Set Camp On / Callback
 Cancel Camp On / Callback
 Set / Answer a Message Waiting
Camp On Key
Wait without
hanging up
Wait for the
system to call
you back
<Camp On>
<Callback>
(851+35) Key
(Hear Busy Tone
or No Answer)
8 5 0
8 7
0
(Hear Busy Tone
or No Answer)
Your phone’s
Indicator is
flashing in Red
MW Key
(851+38) Key
MW Key
(851+38) Key
Set
Answer
0
0