SL1100 Installation Instructions
1-888-632-3794 • info@necsl1100distributors.com
1
Connecting to an SL1100 that IS on a Network but
DOES NOT have a VoIP Card:
Part 1: Assigning and Creating IP Addresses
Requirements:
One (1) Ethernet Cable. (We’ve include a Free Ethernet Cable with this purchase)
Windows XP, Vista or Windows 7
The following instructions will determine the:
Subnet Mask Address
Default Gateway Address
SL1100 System IP Address
Perform the following from a Computer on the Network:
1. Click the Start Button in the lower left corner of your screen.
2. In the search box Type cmd then Press Enter to launch the Command Prompt.
Type cmd Type cmd
To Next Page
Loading...
