Initializing the Disk Array Unit
Initialize the disk array. The initialization method differs depending on the model.
8-1
Collecting host information for FC connection or iSCSI Opt connection
Collect host information from the application server. See the following section:
8-2
Initializing and configuring the disk array
Initialize and configure the disk array from the iSM client. See the following section:
FC connection
iSCSI connection
6-2 Initializing the iSCSI Connection
Initialize the disk array from the iSM client. Configure the disk array after setting up
the iSCSI initiator for the application server. See the following section:
・ To automatically collect host information on an FC model, go to 8-2.
・ If the Disk array unit has only iSCSI connection, go to 8-2.
８
FC connection
SAS connection
5-2 Retrieving Host Information - Overview
7-2 Retrieving Host Information - Overview
5-3 Initializing the FC connection
To Next Page
