NEC SV8300 - Page 2

Page 2 of 2
North American Telecommunications Group
For Service: 604-856-9155 / service@natgtelecom.com
D
O NOT DISTURB (IF APPLICABLE)
 Press SPEAKER
 Press DND key
 Press SPEAKER key again
O
NE-TOUCH KEY PROGRAMMING
 Press FEATURE key
 Press key to be programmed
 Enter an ext number (OR 9 then a telephone number)
 Press FEATURE key
Note: when a one touch key is programmed it takes one of the station bin numbers
from the 00-19 allowed in station speed dial
S
TATION SPEED DIAL PROGRAMMING
 Press STA Soft key
 Press ↑PREV or ↓NEXT to choose a bin 00-19
 Press ENTRY, then NUMBER
 Enter 9 plus the desired number, then press SET
 Press NAME: spell out name (#after each letter),
 Press SET
 Press OK
U
SING STATION SPEED DIAL
 Press REDIAL then a code (00-19)
OR
 Press STA, ↑PREV or ↓NEXT to scroll through speed dials
 Lift handset when desired speed dial is displayed
R
ING TONE
 Press FEATURE key then 3
 Press 3 repeatedly to hear/set different ring tones
 Press F
EATURE key when done
RING VOLUME
 Press FEATURE key then 3
 Use arrow keys to adjust volume
 Press FEATURE key when done